|
The enterprise employs the unique CNC machines. The multi-tool machining on CNC centers with a single workpiece
setup enables to avoid fabrication of numerous auxiliaries.
All machining centres are equipped with the multi-purpose adjustable rigs. The applicable certified software
allows to manufacture the most sophisticated parts without equipping the centers with contour and center-to-center gauges
and jigs. Quick adjustability of automatic machines in conditions of small-batch production as well as the merits of minimal
tooling allow mastering of new products with lowest expenses.
The great variety of parts is fabricated on turning-cut, cross-cut and screw-rolling automatic lathes.
For making parts of irregular shape the enterprise applies the electric erosion and spark methods. In wide
use are domestically developed special machines. Drilling of small holes in case-shaped parts is performed on the multi-spindle
multi-head machines.
Polishing of the parts’ external surfaces enable the original machines with leaf-polishing wheels as
well as the profiling belt-polishing installations.
Marking of alphanumeric inscriptions and images on flat surfaces of plastic or metal parts, hardness of which
not exceeds 50 HRC is performed by an impact marker. The image is applied with a hard-alloyed needle by means of micro-impact
pneumatic vibration head (frequency - 250-300 Hz; depth - 0,08-1,0 mm; working area - 50õ10 mm; max. speed - 2000 mm/min.
The plant consists of a marker (300õ300õ460 mm), control unit (205õ110õ215) and a PC (not lower that IBM 386).
|
